heelo

Container


Refrigerated (reefer) containers are used to handle temperature sensitive cargo. They can be used to supplement cold storage or used in intermodal transport – Sea, Rail and Road. Refrigerated containers are capable of controlling temperature ranges between +30 to -40 degrees Celsius. Special reefer units can regulate temperature as low as -60 degree Celsius. Refrigerated containers are mostly 20’ (6 meter) and 40’ (12 meter) in length. However, we offer special sizes, 8’, 10’ and 45’ according to customer’s requirements.


Why ThaiReefer is the #1 choice for customers:
• Full technical service support
• Full parts support
• Mobile Reefer Technicians on 24/7 standby
• Container stock available to meet customer’s immediate demand
• Wide range of stock available


We also have other containers types available including Dry Containers, ISO Tank Containers, Flat Rack.
Contact us for more information and special rates.



Thaireefer Reefer Container 8/10'

8 ft. / 10 ft. Container

INTERNAL : 2.63 x 2.28 x 2.22 (LWH)
13.3 M3
EXTERNAL : 2.99 x 2.44 x 2.59 (LWH)
Thaireefer Reefer Container 20'

20 ft. Container

INTERNAL : 5.53 x 2.28 x 2.22 (LWH)
28.7 M3
EXTERNAL : 6.05 x 2.44 x 2.59 (LWH)
Thaireefer Reefer Container 40' High cube

40 ft. High Cube Container

INTERNAL : 11.58 x 2.29 x 2.40 (LWH)
67.3 M3
EXTERNAL : 12.19 x 2.44 x 2.89 (LWH)
Thaireefer container 45' High cube

45 ft. High Cube Container

INTERNAL : 13.31 x 2.29 x 2.40 (LWH)
83.1 M3
EXTERNAL : 13.71 x 2.44 x 2.89 (LWH)

Operational environment
The container is designed and manufactured for the transport of frozen, chilled and general cargo in marine, on highway and railway throughout the world. It must remain serviceable under the operating conditions encountered during each of the above mode of transport, as well as during climatic condition at temperatures of minus 40 deg.C to plus 80 deg.C without any effect on the containers strength and water-tightness.

Handling
1) Lifting, loaded or empty, at the top corner fittings vertically by means of spreaders fitted with hooks, shackles or twist-locks.
2) Lifting, loaded or empty, at the bottom corner fittings using slings with terminal fittings at any angle between vertical and 30 degrees to the horizontal.

Transportation
Road: On flat bed or skeletal chassis, secured by twist-locks or combination of twist-locks and front penetration pins to lock the two (2) bottom corner fittings.

Insulation (typical)

 
thickness
overall density
core density
Base
95 mm.
50 kg./cu.m
40 – 47 kg./cu.m
Side
65 mm.
45 kg./cu.m
35 – 42 kg./cu.m
Roof
90 mm.
45 kg./cu.m
35 – 42 kg./cu.m
Door
78 mm.
55 kg./cu.m
45 – 52 kg./cu.m
Front wall
67 – 85 mm.
50 kg./cu.m
40 – 47 kg./cu.m

Refrigerated system
The system is designed to maintain cargo temperatures in a range from –40°C (-22°F) to +30°C (86°F).

The system is designed to operate in ambient temperatures from –30°C to +50°C
The refrigeration system is designed to operate satisfactorily under sea going and environmental conditions as specified below: Salt –laden air, sea spray and high humidity.
Vibrations: of the types encountered on ships, trucks and rail.

The equipment is designed to operate on a nominal 380 V AC / 460 V AC, 3 phase, 50/60 Hz, primary power source. Maximum current draw is 25 Amp.
An automatic system, power supply sensing and correction, is provided to ensure the correct direction of rotation for the fan motors. This is done regardless of the incoming phase sequence from the primary power supply.

The air from the system is delivered to the bottom of the container, with return air through the top of the evaporator coil section (bottom air delivery).

The system is equipped with a data logger, incorporated in the controller.

Pre Trip Inspection
Pre Trip Inspection is a standard test used to ensure that the reefer machine is without failure and can be released for next trip. Under PTI test, in the menu, it is possible to select between a normal PTI test and a Short PTI test, according to below table.

The Multiple Temperature Setpoints (MTS) program enables the system to change the setpoint temperatures of a shipment automatically up to six times during transport, e.g. for the ripening of bananas.



Download

Document for Carrier Thin Line unit

Document for Carrier Prime Line unit

Document for Thermo King Magnum unit

Manual for Thermo King Magnum unit

Document for Daikin unit



Related Link

– ArcticStore | Easy to use, Extremely reliable
– ArcticSuperStore | Almost unlimited capacity
– 45′ High Cube Reefer Container